Epson ActionPrinter 2000 Review

Epson ActionPrinter 2000 Review

The Epson ActionPrinter 2000 is a populate matrix printer that was popular in the previous. While it may not be commonly used nowadays, if you occur to have one, here are the basic actions to use it.

Epson ActionPrinter 2000 How To Use


Ensure the printer is connected to a source of power and your computer system. It typically uses an identical or serial link, so ensure you have the appropriate cable televisions and ports available.

Install Printer Driver

If you are using a contemporary os, it may not have an integrated driver for the ActionPrinter 2000. Because situation, you will need to install the necessary driver from the Epson website or use the driver that came with the printer on a floppy disk or CD.

Packing Paper

Raise the printer cover and load the continuous paper with perforated openings along the sides. Change the tractors or paper overviews to hold the piece securely in position.

Power On

Transform the printer using the power switch. The printer will perform a self-test, which usually involves the printhead moving backward and forward.

Print from Computer system

Once the printer is set up and connected, you can print documents using the installed printer driver from your computer system. When you publish a file, select the Epson ActionPrinter 2000 as your chosen printer.

Printer Setups

You might need to change printer setups, such as paper dimension, print quality, or personality thickness. These setups can usually be accessed through the printer drivers software on your computer system.

Printing Process

The printer strikes a bow with tiny pins, developing personalities on the paper through an effect process. It can be loud compared with modern printers, but it was once a common and dependable way to print documents.


Regularly inspect the bow and paper provided to avoid printing problems. If the print quality deteriorates, it may be time to change the bow or clean the printhead.

Eject Paper

After printing, be sure to eject the continuous paper properly to avoid squandering paper and to maintain the printer ready for the next print job.

Please remember that the Epson ActionPrinter 2000 is an older model, and some specific information may differ depending on the exact variation or year of production. If you have the printer’s manual, it will provide more detailed instructions and fixing tips.

Other Printer: Epson SureLab D570 Review

Epson ActionPrinter 2000 INK

The Epson ActionPrinter 2000 uses a populate matrix printing technology and doesn’t use traditional ink cartridges such as modern inkjet printers. Instead, it uses a bow cartridge that contains ink-soaked fabric bows.

To change the ink bow in the Epson ActionPrinter 2000:

  1. Shut off the printer and wait on the printhead to quit moving.
  2. Open up the printer cover to access the print location.
  3. Locate the ink bow cartridge. It’s usually located close to the printhead setting up.
  4. Grasp the bow cartridge securely and carefully draw it from the printer. Some models may have a launch bar or switch that must be pushed before removing the cartridge.
  5. Take the new ink bow cartridge and remove any product packaging or safety products.
  6. Place the new ink bow cartridge right into the printer, production certain it’s securely sitting in its place. Follow instructions or overviews on the printer or cartridge to ensure proper positioning.
  7. Shut the printer cover.
  8. Power on the printer.

After changing the ink bow, the printer should prepare to use it again. Keep in mind that the quality of the printout mostly depends on the problem of the bubble, so if you notice a decrease in print quality, it may be time to change the ink bow again.

Please remember that the Epson ActionPrinter 2000 is an older model, and finding authentic substitute ink bows may be challenging. If you have a problem finding new cartridges, you might need to explore options for reconditioning or re-inking current cartridges.

Epson ActionPrinter 2000 Review Detail at Epson Website